Welcome to the Arcade FAQ section! In this section I will try to answer as many questions as I can that are frequently asked about building my arcades.
WHAT IS THE SIZE OF THE ARC ON ONE OF YOUR ARCADE PLANS?
I get asked this constantly, even though its mentioned numerous times on the site, YouTube, and elsewhere. Let me be snarky for a minute. If I said it was 12″ for example what would you do? The compass you made from scraps or two nails used with a piece of string does not have measurement marks on it. There is no way to “set it”. Frankly, that’s just not how compasses work.
WHAT IS THE ANGLE OF SOME COMPONENT OF YOUR ARCADE?
I try to include most of them, but the truth is you don’t need to know the angles and shouldn’t be trying to calculate them. It’s inefficient and will never be as accurate as doing it the right way. See my Tablet Arcade video to do it the right way. You’ll be glad you did!
WHAT SIZE ROUTER BIT DID I NEED FOR THE T-MOLDING?
No idea! No seriously, the router bit you use will be specified by the t-molding that you buy. Check the manufacturers recommendations. In my arcades I have used a variety of t-molding. I’ve bought it from several places including Rockler, and Amazon. They range from 1/16″ wide to 1/8″ wide on the slot and 1/2″ to 3/4″ deep. Again, check the manufactures recommendation and buy the bit accordingly.
THE TEMPLATES ARE PRINTING TOO SMALL!
You must use Adobe Reader to print the PDF files. Select Poster mode at the print dialog.
CAN I GET A PDF, PHOTOSHOP PSD, OR JPG OF THE ARTWORK YOU USED?
I purchased most of my artwork from GameOnGraphix. They are copyrighted by them and I don’t have distribution rights. Check with them for more information.
CAN YOUR ARCADE PLANS BE RESIZED FOR A SMALLER OR LARGER MONITOR?
Sure. The SketchUp files are included in every set of plans if you really want to resize it. Honestly though, all you’ll really need to do is cut the front, back and top pieces smaller or larger by whatever amount your monitor is smaller or bigger. For example, if your monitor is 20″ wide, you’d likely need to cut all the of the pieces (except the side panels) 1.5″ shorter. Another option Is to make spacer blocks on each side of the monitor.
WILL YOU CREATE A CUSTOM SET OF PLANS TO FIT MY COMPONENTS? I’LL PAY YOU FOR YOUR TIME!
No. It takes hours to days to make a set of plans. I just don’t have the time to do that and if I did it for a fee, I doubt you could afford my bill.
CAN I PUT AN XBOX OR A PLAYSTATION INSIDE MY ARCADE INSTEAD OF A PC?
Well that depends. If you just want to play XBOX or PlayStation games, most definitely. There are many adapters for plugging in the arcade controls to those systems available. You will not however be able to play MAME games, NES, Sega, etc on those platforms.
WHERE DO I GET THE GAME ROMS?
Getting the ROMs is sort of a grey area. Because the laws are not clear and the companies are mostly silent on the issue I can’t in good faith tell you where to get them. I will tell you that I own a legitimate original cartridge, CD, or license for every ROM on my personal arcades. Even that doesn’t necessarily make it legal, but I want to be as above board as I can be. With that said, if you don’t understand why I can’t tell you where to get them I am sorry. I suspect a little googling you’ll be on your way in no time.
I’D LIKE SOME MORE SPECIFIC DIMENSIONS THAN WHAT’S IN THE PDF? CAN YOU TELL ME HOW FAR APART THESE TWO COMPONENTS ARE OR HOW DEEP THIS SECTION IS WHEN COMPLETED?
Every download of the plans includes the SketchUp file. Simply open it and use the ruler or the dimension tool. You can get a copy of SketchUp Make from www.sketchup.com for free.